SMA DC-18000MHz 2 Way Resistive Power Divider

CPD00000M18000A02A is a 50 Ohm resistive 2-Way power divider/combiner..  It is available with 50 Ohm SMA female coaxial RF SMA-f connectors.  It operates DC-18000 MHz and is rated for 1 Watt of RF input power.  It is constructed in a star configuration.  It has the functionality of a RF hub because every path through the divider/combiner has equal loss.   Our power divider can split an input signal into two equal and identical signals and allows operation at 0Hz, so they're ideal for Broadband applications. The downside is there's no isolation between ports, & resistive dividers are normally low power, in the range of 0.5-1watt. In order to operate at high frequencies the resistor chips are small, so they don't handle applied voltage well.
send email to us

Products Details

Features

1. Functions as a RF hub with equal loss for all paths 2. Available in wideband frequency bandwidths covering the range of DC - 8GHz and DC - 18.0 GHz 3. Can be used to connect multiple radios for testing in closed network Availability: IN STOCK, NO MOQ and free for testing  
Min. Frequency

DC
Max. Frequency

18000MHz
Number of the outputs

2 Ports
Insertion loss

≤6±1.5dB
VSWR

≤1.60 (Input)

≤1.60 (Output)
Amplitude Balance

≤±0.8dB
Phase Balance

≤±8degree
RF connector

SMA-female
Impedance

50OHMS

Notes

Input power is rated for load VSWR better than 1.20:1. The isolation of the resistive divider is equal to insertion loss which is 6.0 dB for the 2 way divider. Specifications are subject to change at any time without any notice. 1. They can be used to provide an RF split or division in any ratio, simply by choosing the correct values of resistor and configuration 2. Resistive dividers are also able to provide an accurate impedance match over a wide band of frequencies provided the correct types of resistor and construction techniques are used 3. They offer a wideband performance and they are cheap and easy to implement and these factors make them very attractive for many applications For your specific application or need any custom dividers , please conact us by : sales@concept-mw.com.

Previous:Wilkinson 12 Way RF Power Divider & RF Power Splitter

Next:RF Fixed Attenuator & Load

Wilkinson Power Divider, Booster Cellular, Wilkinson Coupler, Telecom Parts, 3dB 180degree Hybrid Coupler, Isolator And Circulator, Microwave Components, Rf Spliter, Rf And Microwave Components, Hybrid Power Splitter,

Featured Products

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours